b'& SPRAYERS APPLICATORS SPRAY TIPSHANDLING DRY MATERIALCOMBO-JET 110 DEGREE UR & DR SERIES SPRAY TIPSPart # DescriptionUR110-04 Thru UR110-10 110 Degree Flat Fan Nozzle, Ultra Low DriftDR110-015 Thru DR110-15 110 Degree Flat Fan Nozzle, Drift Control& HOSE TRAILERS VALVES &STRAINERS COMBO-JET 110 Spray Tips For full detailed application information, visit www.wilger.net.! Disclaimer: These charts are published for comparative purposes to demonstrate the differences in the series of Combo-Jet spray tips.Data used to populate this chart is extrapolated from third party testing data from a controlled conditions test with water as the testing solution. Actual spray applications with active chemical ingredients may change the spray dynamics and spray tip performance specifications. Wilger is not liable for any misuse or misrepresentation of this information, leading to (but not limited to) incorrect spray application, crop damage, or any other harm (Not limited to human, livestock or environmental).ACCESSORIES TANKS &TipFlowApplied Rate - US Gal/Acre Spray Tip & Part #CapRate PSI Sprayer Speed - Miles/Hour SR 110 Series MR 110 Series DR 110 Series UR 110 Series*Size US gpm 5 7.5 10 12.5 15 20 Cla VMD 141 600 Cla VMD 141 600 Cla VMD 141 600 Cla VMD* 141* 600 Description Part #0.13 30 7.7 5.1 3.9 3.1 2.6 1.9 F 215 24% 98% C 322 11% 94% C 366 7% 92% - - - - SR110-015 40287-015015 0.15 40 8.9 5.9 4.5 3.6 3.0 2.2 F 199 28% 98% C 277 16% 97% C 328 10% 94% - - - - MR110-015 40291-0150.17 50 10.0 6.6 5.0 4.0 3.3 2.5 F 187 32% 98% M 247 20% 99% C 301 12% 95% - - - - DR110-015 40286-0150.18 60 10.9 7.3 5.5 4.4 3.6 2.7 F 177 34% 98% M 225 23% 99% C 281 14% 96% - - - -0.17 30 10.3 6.9 5.1 4.1 3.4 2.6 M 219 23% 99% C 315 12% 95% VC 431 5% 82% - - - - SR110-02 40287-020.20 40 11.9 7.9 5.9 4.8 4.0 3.0 F 206 26% 99% C 279 15% 97% VC 392 7% 87% - - - - MR110-02 40291-02PUMPS NOZZLES, TIPS NH3 TECHNICAL INDEX 02 0.22 50 13.3 8.9 6.6 5.3 4.4 3.3 F 196 29% 99% M 254 19% 97% C 361 8% 90% - - - - DR110-02 40286-020.24 60 14.5 9.7 7.3 5.8 4.8 3.6 F 188 31% 99% M 235 21% 98% C 336 9% 92% - - - -0.22 30 12.9 8.6 6.4 5.1 4.3 3.2 M 236 20% 98% C 350 9% 91% VC 434 5% 80% NEW UR110-025 SR110-025 40287-0250.25 40 14.9 9.9 7.4 5.9 5.0 3.7 M 222 23% 98% C 320 11% 93% VC 398 7% 86% Droplet Classification &MR110-025 40291-025025 Information to come in 0.28 50 16.6 11.1 8.3 6.6 5.5 4.2 F 211 25% 98% C 296 13% 95% C 370 8% 89% 2020. Visit website forDR110-025 40286-0250.31 60 18.2 12.1 9.1 7.3 6.1 4.5 F 203 27% 98% M 277 15% 96% C 347 9% 92% most up to date charts. UR110-025 40292-0250.26 30 15.4 10.3 7.7 6.2 5.1 3.9 C 303 11% 95% VC 394 6% 86% XC 479 4% 74% NEW UR110-03SR110-03 40287-03FITTINGS EQUIPMENT PLANTER0.30 40 17.8 11.9 8.9 7.1 5.9 4.5 C 279 15% 96% C 360 9% 91% VC 443 5% 80%Droplet Classification &MR110-03 40291-0303 Information to come in 0.34 50 19.9 13.3 10.0 8.0 6.6 5.0 M 260 17% 97% C 333 10% 93% VC 414 6% 84% 2020. Visit website forDR110-03 40286-030.37 60 21.8 14.5 10.9 8.7 7.3 5.5 M 244 19% 97% C 311 12% 94% C 391 6% 86% most up to date charts. UR110-03 40292-030.35 30 20.6 13.7 10.3 8.2 6.9 5.1 C 314 11% 94% VC 416 5% 84% XC 510 3% 69% UC SR110-04 40287-04UR tips are specialty spray tips to 0.40 40 23.8 15.8 11.9 9.5 7.9 5.9 C 288 14% 95% C 377 7% 89% VC 469 4% 76% UC produce ultra coarse spray.MR110-04 40291-0404 0.45 50 26.6 17.7 13.3 10.6 8.9 6.6 M 269 16% 96% C 346 8% 92% VC 438 5% 80% UC Refer to chemical label forDR110-04 40286-04maximum pressures, speeds 0.49 60 29.1 19.4 14.5 11.6 9.7 7.3 M 253 17% 96% C 321 9% 94% VC 412 6% 83% UC and application information.UR110-04 40292-040.53 70 31.4 21.0 15.7 12.6 10.5 7.9 M 239 19% 97% C 300 10% 95% C 391 6% 85% UC0.43 30 25.7 17.1 12.9 10.3 8.6 6.4 C 355 8% 91% XC 486 3% 72% XC 530 2% 63% UC UR tips are specialty spray tips toSR110-05 40287-050.50 40 29.7 19.8 14.9 11.9 9.9 7.4 C 322 11% 93% VC 445 5% 78% XC 503 3% 68% UC produce ultra coarse spray.MR110-05 40291-0505 0.56 50 33.2 22.1 16.6 13.3 11.1 8.3 C 296 13% 95% VC 412 6% 82% XC 482 3% 72% UC Refer to chemical applicationDR110-05 40286-05label for maximum pressures, 0.61 60 36.4 24.2 18.2 14.5 12.1 9.1 C 275 15% 96% C 386 7% 85% XC 465 3% 74% UC speeds and applicationUR110-05 40292-050.66 70 39.3 26.2 19.6 15.7 13.1 9.8 M 257 16% 96% C 364 7% 87% VC 451 4% 76% UC information. 0.52 30 30.9 20.6 15.4 12.3 10.3 7.7 C 416 6% 84% XC 507 3% 68% XC 565 2% 57% UC UR tips are specialty spray tips toSR110-06 40287-060.60 40 35.6 23.8 17.8 14.3 11.9 8.9 C 371 8% 89% XC 474 4% 74% XC 529 2% 64% UC produce ultra coarse spray.MR110-06 40291-0606 0.67 50 39.8 26.6 19.9 15.9 13.3 10.0 C 337 10% 92% VC 448 4% 78% XC 501 3% 68% UC Refer to chemical applicationDR110-06 40286-06label for maximum pressures, 0.73 60 43.6 29.1 21.8 17.5 14.5 10.9 C 308 12% 93% VC 427 5% 81% XC 478 3% 71% UC speeds and applicationUR110-06 40292-060.79 70 47.1 31.4 23.6 18.9 15.7 11.8 C 284 13% 94% VC 409 5% 83% XC 459 3% 74% UC information.0.69 30 41.2 27.4 20.6 16.5 13.7 10.3 XC 453 6% 67% UC 531 4% 53% UC 614 3% 40% UC UR tips are specialty spray tips toSR110-08 40287-080.80 40 47.5 31.7 23.8 19.0 15.8 11.9 XC 408 7% 74% UC 483 5% 61% UC 569 4% 47% UC produce ultra coarse spray.MR110-08 40291-0808 0.89 50 53.1 35.4 26.6 21.3 17.7 13.3 VC 374 9% 79% XC 446 6% 67% UC 534 4% 51% UC Refer to chemical applicationDR110-08 40286-08label for maximum pressures, 0.98 60 58.2 38.8 29.1 23.3 19.4 14.5 C 346 10% 82% XC 416 7% 70% UC 506 4% 55% UC speeds and applicationUR110-08 40292-08GUIDANCE CONTROLS &SPRAYER1.06 70 62.9 41.9 31.4 25.1 21.0 15.7 C 322 11% 84% XC 391 7% 73% UC 482 5% 57% UC information.0.87 30 51.4 34.3 25.7 20.6 17.1 12.9 XC 470 6% 62% UC 523 4% 53% UC 609 5% 41% UC UR tips are specialty spray tips toSR110-10 40287-101.00 40 59.4 39.6 29.7 23.8 19.8 14.9 XC 424 7% 70% XC 478 5% 59% UC 584 5% 45% UC produce ultra coarse spray.MR110-10 40291-1010 1.12 50 66.4 44.3 33.2 26.6 22.1 16.6 XC 388 8% 75% XC 442 6% 64% UC 565 6% 49% UC Refer to chemical applicationDR110-10 40286-10label for maximum pressures, 1.22 60 72.7 48.5 36.4 29.1 24.2 18.2 VC 358 9% 79% XC 413 6% 67% UC 550 6% 52% UC speeds and applicationUR110-10 40292-101.32 70 78.6 52.4 39.3 31.4 26.2 19.6 C 333 10% 81% XC 388 7% 70% UC 537 6% 54% UC information.1.08 30 64.3 42.9 32.2 25.7 21.4 16.1 XC 471 5% 62% UC 618 4% 39% UC 647 3% 35% - - - - SR110-125 40287-125INFORMATION & SPRAY GUNS PRODUCTS 125 1.25 40 74.3 49.5 37.1 29.7 24.8 18.6 XC 423 6% 70% UC 571 4% 47% UC 616 4% 39% - - - - MR110-125 40291-1251.40 50 83.0 55.3 41.5 33.2 27.7 20.8 XC 386 7% 74% UC 535 5% 52% UC 592 4% 42% - - - - DR110-125 40286-1251.53 60 90.9 60.6 45.5 36.4 30.3 22.7 VC 355 7% 78% UC 506 5% 55% UC 572 5% 44% - - - -1.30 30 77.2 51.4 38.6 30.9 25.7 19.3 UC 538 5% 51% UC 608 4% 40% UC 659 3% 40% - - - - SR110-15 40287-1515 1.50 40 89.1 59.4 44.6 35.6 29.7 22.3 UC 496 6% 58% UC 574 4% 45% UC 624 4% 46% - - - - MR110-15 40291-151.68 50 99.6 66.4 49.8 39.8 33.2 24.9 XC 463 6% 64% UC 548 5% 49% UC 597 4% 50% - - - - DR110-15 40286-151.84 60 109 72.7 54.6 43.6 36.4 27.3 XC 436 7% 67% UC 527 5% 52% UC 575 4% 53% - - - -1.73 30 103 68.6 51.4 41.2 34.3 25.7 UC 518 6% 55% UC 593 4% 42% - - - - - - - - SR110-20 40287-2020 2.00 40 119 79.2 59.4 47.5 39.6 29.7 XC 479 6% 62% UC 557 5% 48% - - - - - - - - MR110-20 40291-202.24 50 133 88.5 66.4 53.1 44.3 33.2 XC 449 7% 67% UC 529 6% 52% - - - - - - - - DR110-20 40286-202.45 60 146 97.0 72.7 58.2 48.5 36.4 XC 424 8% 70% UC 506 6% 55% - - - - - - - -2.17 30 129 85.7 64.3 51.4 42.9 32.2 UC 503 6% 56% - - - - - - - - - - - - SR110-25 40287-2525 2.50 40 149 99.0 74.3 59.4 49.5 37.1 XC 468 6% 62% - - - - - - - - - - - - MR110-25 40291-252.80 50 166 111 83.0 66.4 55.3 41.5 XC 441 7% 66% - - - - - - - - - - - - DR110-25 40286-253.06 60 182 121 90.9 72.7 60.6 45.5 XC 419 8% 69% - - - - - - - - - - - -NOTE:1SR, MR, DR, UR spray tips include pre-orifice(s). Pre-orifices are not interchangeable between different spray tips of different series.2Shown application information is based on water @ 80F in a controlled environment and should not be considered actual. Information is provided for comparison to other Combo-Jet spray tips, for educational purposes only. Repeat testing results can vary.! For the full chart of pressures, speeds and droplet size, refer to Tip Wizard or the Combo-Jet Spray Tip Brochure.ASABE Spray Classification(ASABE S572.1 Standard) Fine (F) VMD(Volume Median Diameter) % 141(% Driftable Fines) % 600(% of Small Droplets)Spray quality is categorized based on Dv0.1 and VMD droplet sizes.Medium (M) Size of the median droplet (in ) for aPercentage of volume which is likely to drift.Percentage of volume which is made up Objective testing data (by 3rd party), from spray spectrum recording equipment (without wind tunnel use), Coarse (C) sprayed volume. Half of the volume isAs wind conditions and boom height increase, of small droplets, useful for coverage.has been used to classify spray quality for this chart. Data (e.g. VMD, etc.) can vary between testing equipmentVery Coarse (VC) made up of droplets smaller than VMD,observed spray drift will increased substantially. As % of useful droplets lowers,Extremely Coarse (XC)and method, and is provided as an educational resource only. More information @ Wilger.net. Ultra Coarse (UC) with half made up of droplets larger. overall coverage is reduced. 322'