b'PUMPSAPPLICATORS & SPRAYERSHYDRAULIC MOTOR DRIVEN CENTRIFUGAL PUMPSDRY MATERIALHANDLINGTRAILERS VALVES &FITTINGS1 1/2x1 1/4 FMC-200-HYD-210FMC-HYD-204 FMC150-HYD-206 FMC-200-HYD-304 2x1 1/2FMC-HYD-210 1 1/4x1 SuctionDischarge FMC-200-HYD-310 SuctionDischargeTANKS &ACCESSORIESFMC-HYD-310 Suction DischargeGPMPUMPS NOZZLES, TIPS & SPRAY GUNSSTAINLESS STEEL WEAR RING AND SHAFT STANDARD1 1/4 Suction x 1 DischargePart # Weight DescriptionFMC-HYD-203 26 Maximum pressure 100 PSI at 4600 RPM and 75 GPM at open discharge.3 GPM hydraulic motor can be used on Open Center Systems rated 3-12 GPM.FMC-HYD-204 26 Maximum pressure 100 PSI at 4600 RPM and 75 GPM at open discharge.4 GPM hydraulic motor can be used on Pressure Compensating Closed Center Systems or Open Center Systems rated at 4-13 GPM.Equipped with restrictor orifice.STRAINERS & HOSEFMC-HYD-210 27 Maximum pressure 100 PSI at 4600 RPM and 75 GPM at open discharge.8 GPM hydraulic motor can be used on Load Sensing Closed Center Systems or Open Centered Systems rated 8-17 GPM.Equipped with restrictor orifice.FMC-HYD-310 33 Maximum pressure 60 PSI at 3950 RPM and 75 GPM at open discharge.16 GPM hydraulic motor can be used on Open Center Systems rated 16-24 GPMFMC-HYD-LM 18 Pump less motor for FMC-HYD-2xx modelsPLANTEREQUIPMENTSTAINLESS STEEL WEAR RING AND SHAFT STANDARD1 1/2 Suction x 1 1/4 DischargePart # Weight DescriptionFMC-150-HYD-206 31 Maximum pressure 120 PSI at 5100 RPM and 120 GPM at open discharge.7 GPM hydraulic motor can be SPRAYERCONTROLS &GUIDANCEused on Pressure Compensating Closed Center Systems, Load Sensing Closed Center Systems, and Open Center Systems rated 7-16 GPM.Equipped with restrictor orifice.FMC-150F-HYD-206 31 Same as above with flanged and NPT ports. Inlet 220 full port flange & 1-1/2 NPT outlet 200 standardport flange & 1-1/4 NPT max flow: 135 GPM max pressure: 120 PSIFMC-150FS-HYD-206 31 Same as above but 316 stainless steel frame and voluteFMC-150-HYD-LM 31 Pump less motor for 200 Series motorFMCSC-150F-HYD-206-PWM 38 Same as FMC-150F-HYD-206 with severe duty silicon-carbide seal and integrated PWM valveFMCSC-150FS-HYD-206-PWM 38 Same as FMC-150FS-HYD-206 with severe duty silicon-carbide seal and integrated PWM valve2 Suction x 1 1/2 DischargePart # Weight DescriptionNH3 PRODUCTSFMC-200-HYD-210 33 Maximum pressure 60 PSI at 3950 RPM and 180 GPM at open discharge.8 GPM hydraulic motor can be used on Pressure Compensating Closed Center Systems, Load Sensing Closed Center Systems, and Open Center Systems rated 8-17 GPM.Equipped with restrictor orifice.FMC-200-HYD-304 38 Maximum pressure 120 PSI at 5100 RPM and 200 GPM at open discharge.11GPM hydraulic motor can be used on Pressure Compensating Closed Center Systems, Load Sensing Closed Center Systems, and Open Center Systems rated TECHNICAL INFORMATION11-20 GPMEquipped with restrictor orifice.FMC-200F-HYD-304 38 Cast iron centrifugal driven by a 11 GPM hydraulic motor with integral needle valve. Inlet 300 series standard port flange. Outlet 220 series full port flange. Max flow: 240 GPM. Max Pressure: 100 PSIFMC-200SS-HYD-304 36 Same as above but 316 stainless steel impeller, frame, and voluteFMC-200-HYD-310 38 Maximum pressure 60 PSI at 3950 RPM and 180 GPM at open discharge.16 GPM hydraulic motorFMC-200-HYD-LM 31 Pump less motor for 210 modelINDEX191'